About
Seal Bond Products
Seal Bond Products
are a series of multipurpose Adhesives, Coatings and Sealants designed for difficult
containment, bonding or sealing applications.
- Seal Bond Products
are based on a proprietary, elastomeric copolymer. These products have exceptional
adhesion, elasticity, and resistance to tear, shear, stress, and weathering
properties and are non-toxic.
- Seal Bond Products
cure with the presence of atmospheric moisture enabling them to cure in damp,
wet environments.
- Seal Bond Products
cure in low temperature below 30 degrees F. They resist operating temperatures
-40°F to 220°F and are temporarily resistant to 390°F.
- Seal Bond Products
are single component materials which are packaged in caulking tubes or pails.
- Seal Bond Products
are normally inert to solvents, acids and alkalis. This resistance can be
affected by temperature, cure time, and the presence or lack of moisture during
and after the application.
- Seal Bond Products
are paintable with most polymer coatings and linings
- Seal Bond Products
have high elongation properties and will maintain seals in high vibration
and expansion areas. Seal Bond stays flexible and will not become brittle
in UV light.
- Seal Bond Products
usually do not require priming.
- Seal Bond Products
are solvent free. Seal Bond can safely be used in confined spaces and are
environmentally compliant products.
- Seal Bond 90
can be used to seal control joints, cracks and X joints that are wet, green
or damp to temperatures as lower than 30 Degrees F.
- Seal Bond 95/100
can be used to bond secondary containment liners to damp concrete including,
Hypalon, EPDM. This material can be used to repair roofs or liners by bonding
aggressively to EPDM, PVC, coal tar, many types of coated metal, and FRP.
- Seal Bond 95/100
can be used to seal termination points and penetrations into secondary containment
liners or roofs. Emergency repairs can be made through water.
- Seal Bond MSPR
- is a sprayable or trowelable version used on vertical walls for concrete
waterproofing, scratch coating or repair
- Seal Bond MSL
- Self leveling for repair of pitted floors or as crack bridging underlayment.
MSPR and MSL can be used to scratch coat floors and walls even wet, green
or damp concrete to temperatures as low as 30 Degrees F.
- Seal Bond 88
- is especially formulated for bonding to EPDM rubber compounds
|
|
Now
Available
CD Catalog of our
complete product line. Includes drawing,
specifications and other content.
Click Here to order.
Tanks
| Elast-Liner®
| Membranes/Linings | Sealant
Products | Coatings
Spill Decks | Flooring
| Stormwater Management | Pipe
& Tank Repair | Industry Links
©
2000—2010 Chemical Containment Systems Inc. All rights reserved.
Trademarks shown are the property of their respective owners.
Chemical Containment
Systems is a proud Member of TeamEnviro,
a full spectrum Green consulting group. > More
Info
Design & Hosting by
|
